I’ll be restarting AZ today for an update to lemmy 0.19.

Upgrade complete.

This is a major upgrade, so I expect there to be some issues. Strap in, enjoy the ride.

Expect:

  • further restarts
  • bugs
  • slowdowns
  • logouts
  • 2FA being disabled
  • possibly issues with images, upgrading pictrs to 0.4 at the same time
  • hitmyspot@aussie.zone
    link
    fedilink
    arrow-up
    7
    ·
    11 months ago

    Just a heads up that liftoff no longer works as it has not had necessary upgrades to be co patibke with 0.19

    It is now end of life unless the dev returns. There have been no updates for a few months.

    • veroxii@aussie.zone
      link
      fedilink
      arrow-up
      1
      ·
      11 months ago

      Thanks. I really liked liftoff… Was the closest to baconreader from the olden days.

      Posting this reply on summit. Really good and very similar to liftoff so far (at least in dark mode)

    • Nath@aussie.zone
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      11 months ago

      I use Boost in compact mode. I selected it because it felt like BaconReader. Also, it was only $5ish.

    • Lodion 🇦🇺@aussie.zoneOPM
      link
      fedilink
      arrow-up
      7
      ·
      11 months ago

      Lots of back end improvements… on the user facing side 2FA enrollment improvements, and highlighting of recent comments. I’ve not noticed anything else, but I’m sure its there.

      • Zagorath@aussie.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        On the inbox page, if you tick the “mark as read” button, it now immediately gets rid of that comment. Which personally I actually view as a degradation.

        But also, on a post page, you can now interact with other elements in the middle of writing a comment, and it doesn’t automatically cancel your comment. So now you can safely upvote the comment you’re replying to half way through writing that reply! This is awesome!

      • Baku@aussie.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        I’m happy about the new 2fa system! The old one was so confusing I gave up even trying. One thing I did have a question about: are there backup codes somewhere I can download in case I lose my app or whatever?

      • Baku@aussie.zone
        link
        fedilink
        English
        arrow-up
        3
        ·
        11 months ago

        My TPA (Boost) seems to no longer be showing karma amounts on user profiles. The update has broken whatever method boost used to extract that number, I presume?

        • Nath@aussie.zone
          link
          fedilink
          arrow-up
          1
          ·
          11 months ago

          I think I’m ok with this. I liked the initial concept of karma not being tracked long-term.

          I won’t really mind if the apps bring this data back, but I won’t lose sleep if it’s gone.

          • Baku@aussie.zone
            link
            fedilink
            English
            arrow-up
            1
            ·
            11 months ago

            I don’t know, I kind of like having imaginary internet points, but maybe having it as an off by default toggle might be a good middle ground

      • maniacalmanicmania@aussie.zone
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        11 months ago

        2-factor authentication is no longer enabled as it was before the upgrade. I’m not sure if the 2FA code option on the enabling modal is part of setting up new authentication or for using old auth code and I haven’t tested it.

        • Lodion 🇦🇺@aussie.zoneOPM
          link
          fedilink
          arrow-up
          4
          ·
          11 months ago

          This was deliberate on the part of the devs. Old 2FA enrollment was finicky and error prone, locking many users out. So they’ve disabled it for everyone, forcing re-enrollment to enable it.

            • Lodion 🇦🇺@aussie.zoneOPM
              link
              fedilink
              arrow-up
              2
              ·
              edit-2
              11 months ago

              You’ve got a good memory. Yes, the new process is slightly different so the old guide isn’t relevant. Also its not as important anyway, enrolling no longer enables 2FA before you have a device capable of generating TOTP codes.

              • maniacalmanicmania@aussie.zone
                link
                fedilink
                English
                arrow-up
                2
                ·
                11 months ago

                I see. I didn’t really understand the complication last time but appreciated the guide. Re-enrolling was a cinch. I best do the bot account. Anything about bot accounts we should know about after this upgrade?

      • maniacalmanicmania@aussie.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        OK. I might make add each issue as a separate comment. Let me know if you prefer they are combined.

        1. I get this when I try to access my profile
  • Aesecakes@aussie.zone
    link
    fedilink
    arrow-up
    1
    ·
    11 months ago

    Will broken images come back at some point?

    Getting this message on some, but not all images:

    {“msg”:“Socket not connected (os error 107)”}

  • 𝚝𝚛𝚔@aussie.zone
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 months ago

    Seems to be working sweet in Voyager, just the log out and we’re away again.

    Cheers computer expert guy!

  • Zagorath@aussie.zone
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 months ago

    I can’t seem to log in to Jerboa. Guess it hasn’t been updated with 0.19 support yet. Ah well.

    • Zagorath@aussie.zone
      link
      fedilink
      arrow-up
      1
      ·
      11 months ago

      Wait, I just needed to manually update Jerboa. It hadn’t updated automatically for some reason.

  • Gbagginsthe3rd@aussie.zone
    link
    fedilink
    arrow-up
    1
    ·
    11 months ago

    Error with Memmy on iOS. Needed to log out and log back in.

    Apparently there was an issue with my password being incorrect. However I hadn’t changed anything.

    • Baku@aussie.zone
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 months ago

      The log in errors and needing to re log in is a standard thing AFAICT. I was in a weird unauthenticated but still logged in state on boost and had to log back in on desktop too