About a year ago I switched to ZFS for Proxmox so that I wouldn’t be running technology preview.

Btrfs gave me no issues for years and I even replaced a dying disk with no issues. I use raid 1 for my Proxmox machines. Anyway I moved to ZFS and it has been a less that ideal experience. The separate kernel modules mean that I can’t downgrade the kernel plus the performance on my hardware is abysmal. I get only like 50-100mb/s vs the several hundred I would get with btrfs.

Any reason I shouldn’t go back to btrfs? There seems to be a community fear of btrfs eating data or having unexplainable errors. That is sad to hear as btrfs has had lots of time to mature in the last 8 years. I would never have considered it 5-6 years ago but now it seems like a solid choice.

Anyone else pondering or using btrfs? It seems like a solid choice.

  • cmnybo@discuss.tchncs.deEnglish
    27·
    11 hours ago

    Don’t use btrfs if you need RAID 5 or 6.

    The RAID56 feature provides striping and parity over several devices, same as the traditional RAID5/6. There are some implementation and design deficiencies that make it unreliable for some corner cases and the feature should not be used in production, only for evaluation or testing. The power failure safety for metadata with RAID56 is not 100%.

    https://btrfs.readthedocs.io/en/latest/btrfs-man5.html#raid56-status-and-recommended-practices

    • Eideen@lemmy.worldEnglish
      2·
      2 hours ago

      I have no problem running it with raid 5/6. The important thing is to have a UPS.

      • dogma11@lemmy.worldEnglish
        1·
        7 minutes ago

        I’ve been running a btrfs storage array with data on raid5 and metadata I believe raid1 for the last 5 or so years and have yet to have a problem because of it. I did unfortunately learn not to fully trust the windows btrfs driver but was fortunately able to restore from backups and redownloading.

        I wouldn’t hesitate to set it up again for myself or anybody else, and adding a UPS would be icing on the cake. (I added UPS to my setup this last summer)

    • lurklurk@lemmy.worldEnglish
      6·
      5 hours ago

      Or run the raid 5 or 6 separately, with hardware raid or mdadm

      Even for simple mirroring there’s an argument to be made for running it separately from btrfs using mdadm. You do lose the benefit of btrfs being able to automatically pick the valid copy on localised corruption, but the admin tools are easier to use and more proven in a case of full disk failure, and if you run an encrypted block device you need to encrypt half as much stuff.