triangulation

trilateration actually (^0_0)

Wir haben Grund zum saufen!

https://en.wikipedia.org/wiki/Nick_Piantanida

This guy was in a remote controlled, parachute equipped gondola at 17km altitude wearing a pressurized suite. His suit broke and even though the emergency descent of the gondola was immediately activated to descend safely, he later died from embolism (bubbles forming in the blood because of rapidly decreasing pressure). Passenger jets cruise at about 11km so i gather it would be similar.

OpenWRT does not use liblzma or systemd so i think that one is pretty safe. I would also be surprised if Android included OpenSSH server binaries in that way.

In terms of modern shells being more complex in general: yes and no. modern shells pretty much always use some kind of electronic fusing, sometimes multiple kinds of electronic fuses. back then they had bombs, mines and grenades with literal clockwork inside and electronics was still very rare. also fuses and primary charges were not easy to produce reliably.

There has been some fusor research going on for decades. The issue that killed that direction of fusion research was ultimately that the electrons do not behave as the initial simple models suggested and in the real world the power loss from the fast electrons is just too big for any reasonably sized device to allow for self sustaining fusion.

https://theculturetrip.com/europe/germany/articles/11-german-places-with-incredible-and-hilarious-names

Not as long as OPs but has some real goodies.

throw off the yolk

lol

Maybe those were illegal smoke and honey melons 🤔

that is not a power plant. a power plant supplies power…

So what does this say about the dark matter deficient galaxies? https://www.nature.com/articles/s41550-019-0930-9

What makes them think that the library of Alexandria did it any other way? Nerds have existed long before the internet…

If you want to be super exact about it it would be roughly 4 times the mass of limescale + mass of already dissolved CaCO₃ in your tap water (you can look that up if you know the hardness index of your water).

But really just don’t be stingy with citric acid and it will be fine is what i am saying.

Here is the math:

Note that citric acid works a bit more nuanced than many other descalers: it acts as a chelating agent at high concentrations (2x the Ca2+ concentration) and is more effective at removing scale because of this effect, but at lower concentrations the effect might actually be reversed because it can form solid calcium citrate, which has a very low solubility in water.

If you are using citric acid based descaler you should make sure that you are always using enough of it to avoid the formation of calcium citrate.

I think they are referring to Uranium with natural isotopic abundance. Which is complete bullshit when you put a picture of a nuclear power plant behind it – which in most cases can not function with the natural isotopic abundance (heavy water reactors being the exception, not the rule).

first you would need to know what COP you could reasonably get, which among other things depends on the average outside temperature during heating season if you want to use an air sourced heat pump.

The COP can be in a largish spectrum depending on these factors but typical values are 3.5 for average homes in temperate climate. Higher if you live in a warmer climate and lower if you live closer to the arctic. If you want to really do the math it might be good to get help from a professional specialising in heat pumps.

Edit: this is for heating use only. A heat pump can also be used for cooling but then the climate effect is inverted.

Indeed. atetheonion might contain a bunch of idiocy, but i would not be offended by being included there just because i was sceptical of something.

Uhhh you realize there are muskets hanging on the wall, right? I think its fair to say they don’t just make swords :)

also: you can calculate the carnot cycle efficiency of a solar cell as if it was a classical heat-power-machine, even though it has no visible moving parts.

the reason why this works and yields realistic results is because the basic principles of thermodynamics stay the same no matter if you are working with steam, combustion gasses or photons and electron gas inside a semiconductor.

downvote for lack of feathers. smh.