I’m curious what it takes to do furniture upholstery. And in a completely different scope, what it takes to sew Lycra in clothing like cycling bib shorts.

I mean the secret to doing it right.

For instance, if you want to paint cars, I can tell you all kinds of levels, but the secret sauce is sticking to a single paint system from primers to clear, 3m imperial sandpaper used wet with a drop of dish soap, block sanding with guide coats, degreaser for reflections tests, a reliable air drying system for compressed air using an oilless compressor and very large tank, a full set of Sata spray guns, the best pneumatic DA sander your paint jobber sells. Then you’ll also need a variable speed buffer, fresh cut/medium/finish pads, 3m Perfect-it 2 and whatever fine finisher they sell now that does not contain oil fillers. Tape, paper, all all that is a given. Perfect automotive class paint is 99.9% prep and sanding, and only 0.1% painting. The number one rule is: when you think you should be done, step away for a break, when you get back acknowledge that you are only halfway done and get back to work. Your emotional state is irrelevant; the only truth that matters is in sanding guide coats and degreaser reflection tests.

All that said, with all of my experience, I can mix paint systems to get cheaper combinations between systems, I can spray with a $20 harbor freight gun, and polish with a sock and toothpaste in a zombie apocalypse pinch.

Does anyone here know sewing on this level? In a (coco) nutshell, what are the machines and standards to do it right?

  • proudblond@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    3 months ago

    I feel like most of the people answering you are not actually sewists.

    The person mentioning the serger/overlocker machine is correct regarding stretchy material. You can do it on a sewing machine but it won’t look nice. On a regular sewing machine, a straight stitch will give you a non-stretchy seam. A zigzag stitch will be stretchy but most often people aren’t pleased with the look of it. If you look at the inside of a t-shirt, the side seams are generally done with a serger. (A coverstitch machine is usually what is used for a hem. It makes a row of two lines on the front. It only does that.) The reason a serger works better for knit fabric is because of the differential feed, meaning it can better handle sewing two stretchy fabrics together such as in a seam. A sewing machine only feeds by catching the bottom fabric and scooting it forward, and that can cause issues if the fabric is stretchy.

    You also need appropriate needles, especially for something like spandex. I haven’t worked with it at all so I’m not sure 100% what to recommend, but possibly a ball point or microtex needle.

    Meanwhile, for upholstery, all you need (I think) is a straight stitch. Technically you could even try to do it by hand, but depending on the material, it could be really difficult. You’d definitely need a heavy duty needle, and possibly pliers to pull the needle through thick fabric. If you went for a machine, you’d want something robust. I’m actually about to try an upholstery project using my mid-range Bernina; it has successfully sewn several bags so I think it can handle it. But Bernina is not a mid-level brand, and I spent good money on that machine. Certainly, like in most things, you get what you pay for.